Rode Microphones S1 Pro Vocal Condenser Microphone Standard

$329.00

New

Operation Power: 48V. Output Impedance: The S1 will operate satisfactorily into a load impedance as. low as 1kOhm. If a load below this is used, the output signal. level will be reduced. The S1 output is balanced between pin 2 (hot) and pin 3. (cold). Pin 1 is ground. Acoustic principle: Externally polarized condenser, pressure. gradient transducer. Directional pattern: Supercardioid. Frequency range: 20Hz-20kHz. Polar pattern. Output impedance: 50 ohms. Signal/Noise ratio DIN/IEC 651: 75dB (1kHz rel 1 Pa; per IEC651, IEC268-15). Equivalent noise: 18dBA SPL (per IEC651, IEC268-15). Maximum SPL: 151dB (@ 0.7% THD into 1kOhm). Sensitivity at 1 kHz into 1 kOhm: -46.5dB re 1 Volt/Pascal, (4.7mV @ 94dB SPL), +/- 2dB into 1kOhm. Maximum output voltage: +12.5dBu (@ 0.7% THD into 1kω). Dynamic range of the mic. amplifier DIN/IEC 651: 132dB (per IEC651, IEC268-15). Power (Supply voltage): Phantom supply voltage – 44V to 52V. Current consumption – 4.4 mA. Polarity: A pos
Rode Microphones S1 Pro Vocal Condenser Microphone Standard