Posts

Drawmer DL 241XLR 2-Channel Compressor Standard

Drawmer DL 241XLR 2-Channel Compressor Standard
$775.00

New

Has features, displays and control functions that make it outstanding for broadcast, sound reinforcement, and recording applications.
Drawmer DL 241XLR 2-Channel Compressor Standard

dbx 1066 Compressor/Limiter/Gate Standard

dbx 1066 Compressor/Limiter/Gate Standard
$429.95

New

Dual channel compressor/limiter/gate. Impressive noise and THD performance specs are the essentials, but the 1066 doesn’t stop there. Features like sidechain (with SC Monitor), Contour, True RMS Power Summing, Neutrik XLR audio connectors, and PeakStopPlus limiting also serve to set this unit out front in the world of high-performance compression.
dbx 1066 Compressor/Limiter/Gate Standard

dbx 220i 2X2 Loudspeaker Management System with Display Standard

dbx 220i 2X2 Loudspeaker Management System with Display Standard
$629.95

New

The perfect signal processor for any fixed-install application.
dbx 220i 2X2 Loudspeaker Management System with Display Standard

BSS Audio DPR-402 Dual Compressor De-esser Limiter Standard

BSS Audio DPR-402 Dual Compressor De-esser Limiter Standard
$1,499.99

New

Much more than an ordinary compressor/limiter!
BSS Audio DPR-402 Dual Compressor De-esser Limiter Standard

Drawmer 1969 Mercenary Edition Mic Pre Amp/Tube Compressor Standard

Drawmer 1969 Mercenary Edition Mic Pre Amp/Tube Compressor Standard
$2,575.00

New

All measurements taken at +4dBu operating level)
INPUT IMPEDANCES: LINE 20K Ohms, MIC 150 Ohms to 600 Ohms< AUX 2.2M Ohms
MAXIMUM INPUT LEVEL: +20dBu
OUTPUT IMPEDANCE : 50 Ohms
MAXIMUM OUTPUT LEVEL: +22dB (balanced)
BANDWIDTH: <10Hz to 22KHz -1Db
UNITY GAIN NOISE: BYPASS -95Db; LINE -85Db; MIC (E.I.N.) -134.5dB shorted, -130.5dB @ 150 Ohms, -129.8dB @ 200 Ohms
DISTORTION @ 1Khz: Line Input with BYPASS selected,< 0.1%_Line Input with NORMAL selected,< 0.35%
POWER REQUIREMENTS: 100-120Volt or 195-250Volt at 50-60Hz, 38 Watts, FUSE RATING 250mA for 240Volt, 500mA for 120Volt, CONFORMING TO BS EN 60127-2:1991 SHEET III
FUSE TYPE: 20mm x 5mm, Class 3 Slo-Blo, 250Volt working
CASE SIZE: 482mm (w) x 88mm (h) x 250mm (d)
WEIGHT: (incl packaging) 6.0 Kgs
RELEASE TIMES: 100 ms, 500ms, 1 sec, 200 ms to 2 sec semi-automatic/signal dependant, 5 500 ms to 5 sec semi-automatic/signal dependant, Automatic 1 sec to 10 sec si
Drawmer 1969 Mercenary Edition Mic Pre Amp/Tube Compressor Standard